Alphacam 2015 R2 | 64 bit Support Info Icon
The latest release of the game-changing Alphacam CAD/CAM software ensures that users can exploit the full power of their PC.
Alphacam 2015 R2 is 64-bit compatible, meaning its programs can utilise all the available memory.

www.alphacam.com
 

Alphacam 2015 R2 | 64 bit Support

Alphacam 2015 R2 | 64 bit Support

The latest release of the game-changing Alphacam CAD/CAM software ensures that users can exploit the full power of their PC.
Alphacam 2015 R2 is 64-bit compatible, meaning its programs can utilise all the available memory.

www.alphacam.com

 
Alphacam 2015 R2 | Advanced 5 Axis

Alphacam 2015 R2 | Advanced 5 Axis

For Advanced 5-Axis Machining, while the previous release of Alphacam introduced surface machining, considerable enhancements in 2015 R2 give many more advanced options, including wire frame machining for effective trimming, and multi-axis roughing which allows roughing to the actual contour, removing any unnecessary fresh-air machining.
Side Wall Axial Relief Feed (SWARF) machining reduces 5-axis cycle times and gives a better surface finish through effective side-of-tool machining.
The strategy is to finish the part in one cut, through constant cutting conditions giving increased material removal and a constant low cutting force, along with simultaneous 5-axis vector orientation providing full access to machining areas.

www.alphacam.com

 
Alphacam 2015 R2 | Feature - Rendered Z Levels - Textures

Alphacam 2015 R2 | Feature - Rendered Z Levels - Textures

Improved on-screen realism is achieved through Rendered Z-Level Geometries and Material Textures.
“By rendering Z-level parts we’re making them visually clearer to the user,” says Paul Green. “And users can now apply any texture, whether it be metal, wood, granite, plastic or composite, so that it looks on-screen how it will look on the machine.
Rendered clamps and fixtures can also be shown on a full machine configuration.”

www.alphacam.com

 
Alphacam 2015 R2 | GUI

Alphacam 2015 R2 | GUI

New GUI Customisable Radial Menu
The GUI includes a new fully customisable radial menu. “It means users can set up as few or as many commands as they need.”

www.alphacam.com

 
Alphacam 2015 R2 | Nesting

Alphacam 2015 R2 | Nesting

A new function in Nesting now identifies parts by name, rather than number as in previous releases. “As well as the part names showing in the nest on-screen, they also appear in reports. It helps to make in formation more relevant – users can see at a glance which part is on a nested sheet.”

www.alphacam.com

 
Alphacam 2015 R2 | Part Management

Alphacam 2015 R2 | Part Management

Another major aspect of new functionality has been added to Part Management, with full associativity between a part and its copy. Whenever an original part is amended on Alphacam 2015 R2, there is the option to automatically update the copy.

www.alphacam.com

 
Alphacam 2015 R2 | Rough or Finish

Alphacam 2015 R2 | Rough or Finish

A command in the Rough Finish cycle – Previous Tool Profile – automatically uses the profile of the previous tool to generate the new tool path to machine corners where form and shaped tools have left material there.

www.alphacam.com